کارتریج CLEAN-UP Primary-Secondary Amine

ویژگی های محصول:
  • PSA:Chemical Phase
  • 11.1%:Organic Loadin
  • 60Å:Average Pore Size
  • 1.100 meq/g:Anion Exchange
  • 500 m2/g:Surface Area
  • 0.77 cm3/g:Pore Volume

این فروشگاه از معتبرترین برند ها و بهترین محصولات بازار استفاده میکند.

  • تضمین بهترین قیمت بازار
  • پشتیبانی عالی ۲۴ ساعته، ۷ روز هفته
  • بازگشت وجه در صورت عدم رضایت
  • اصالت کالاها از برترین برندها
  • تحویل سریع در کمترین زمان ممکن

MECHANISM OF ION EXCHANGE BONDING

Compounds are retained on the sorbent through ionic bonds.  Therefore, it is essential that the sorbent and the analyte to be extracted are charged.  Generally, the number of molecules with charged cationic groups increases at pH values below the molecules pKa value.  The number of molecules with charged anionic groups decreases at pH values below the molecule’s pKa value.  To ensure 99% or more ionization, the pH should be at least two pH units below the pKa of the cation and two pH units above the pKa of the anion.  Elution occurs by using a solvent to raise the pH above the pKa of the cationic group or to lower the pH below the pKa of the anion to disrupt retention.  At this point, the sorbent or compound is neutralized.

These sorbents are composed of a silica backbone bonded with carbon chains terminated by a negatively or positively charged functional group.  Ion exchange interactions occur between a sorbent that carries a charge and a compound of opposite charge.

This electrostatic interaction is reversible by neutralizing the sorbent and/or analyte.  Ion exchange bonds can also be disrupted by the introduction of a counter ion to compete with the analyte for binding sites on the sorbent.

ANION EXCHANGE SORBENTS & STRUCTURES

Sorbent                                                                         Structure                                                                               pKa

Aminopropyl (primary amine)                                   -Si-(CH2)3NH3+                                                                             9.8

N-2-Aminoethyl (primary & secondary amine)            -Si-(CH2)3NH2+(CH2)2NH3+                                                          10.1, 10.9

Diethylamino (tertiary amine)                                  -Si-(CH2)3NH+(CH2CH3)2                                                              10.6

Quaternary Amine Chloride                                    -Si-(CH2)3N+(CH3)3 Cl–                                                         Always charged

Quaternary Amine Hydroxide                                 -Si-(CH2)3N+(CH3)3 OH–                                                       Always charged

Quaternary Amine Acetate                                     -Si-(CH2)3N+(CH3)3 CH3COO–                                             Always charged

Quaternary Amine Formate                                    -Si-(CH2)3N+(CH3)3 HCOO–                                                  Always charged

Polyimine                                                            -Si-(CH2)3NH(CH2COOH)(CH2)N(CH2COOH)2

 

UnitsDescriptionPart Number
1Clean-Up Aminopropyl 96 Well Plate 100mgWSHPSA11
10Clean-Up PSA 10,000mg 75mLCUPSA110M75
20Clean-Up PSA 1000mg 15mLCUPSA1M15
30Clean-Up PSA 1000mg 6mLCUPSA1M6
50Clean-Up PSA 100mg 10mLCUPSA11Z
100Clean-Up PSA 100mg 1mLCUPSA111
20Clean-Up PSA 2000mg 15mLCUPSA2M15
50Clean-Up PSA 200mg 10mLCUPSA12Z
50Clean-Up PSA 200mg 3mLCUPSA123
100Clean-Up PSA 50 mg 1mLCUPSA1L1
50Clean-Up PSA 500mg 3mLCUPSA153
50Clean-Up PSA 500mg 6mLCUPSA156

 

سبد خرید
هیچ محصولی در سبد خرید نیست.
ورود به سایت